China DIHAO Electric Are Professional Industrial Plugs And Sockets, Terminals,Cable Tie,Waterproof Cable Connector Manufacturers.
Email: sales@txele.cc

News

DIHAO Electric provides you with real-time information

You are here : Home > News

Where is the advantage of the circular industrial connector?

Promulgator : DIHAO Date : 2018-04-04

With the development of China's economy, industry is also expanding, because the electronic equipment used in industry is very much, industrial connector is also an indispensable part of the electronic equipment, so the use of industrial connectors is very wide, in fact, industrial connectors in addition to many accidents in industry, in me In life, they are also very factory, such as the Industrial Socket Coupler in the refrigerator, the circuit connection in the notebook and so on, all are useful to the industrial connector, in fact, some connectors can not be said to be industrial, but with the same performance, water can be prevented from entering.

Because of the environmental problems in industry, some complex spaces can not be used for all shapes of connectors, so we can find that industrial connectors have many shapes, such as circular and strip, different shapes have different advantages, long strip connectors are not so wide, but they can be used for connection. In a longer environment, the circular connector is not so large as it is connected, but it is good to use in some smaller places. If there is no space in the environment with some kind of connector installation, then do not use it reluctantly, it will destroy performance. The most important thing we see in daily life is the circular connector, PS2 is a typical example, but the use of the most is USB, on the interface on the notebook, perhaps many people wonder why some interfaces are round, and some of the interfaces are square. Some interfaces need to receive more needles, so the area of the circle can be larger and can receive a lot of needles, so I recommend the use of the PS2 interface is better, and then it can be found that the circular design not only does not occupy the other position and the effect is not very good. Therefore, the general signal connectors are made by circular connectors.

In addition to life in the use of more circular, industry is also very much, the largest advantage of the circular connector is the increase of the contact area of the connector, the mathematics can also be known in general, then save the cost of the cost of the use of the connector in the industry. Circular connector is not the same in the use of environmental conditions, it can be up to thirty thousand meters above the altitude can be used without obstacle, it can work in the environment humidity of 95 percent less than the place, the ability to resist vibration at 10 ~ 2000HZ acceleration 196 m/s2 (20g), the ability to resist impact in the acceleration peak The value can reach 980 m/s2 (100g), and the mechanical life is more than one thousand times. From the parameters, the circular connector has the absolute advantage, but we can not say that other industrial connectors are not good, only the suitable is the most important.